Solar Energy Installation

Solar Energy Solutions

With our expertise and integration of technologies across the solar value, our company has become a leading solar company not only in the UAE, but also in GCC countries and the entire MENA region. As a leader in solar solutions and technologies, our solar company only works with world class organizations worldwide. Solar panels are installed in “rows” referred to as “strings” Sunlight hits the solar panels and DC is generated. This Direct Current is fed into an inverter and converted into Alternating Current. The AC is connected to your existing MDB “Main distribution board” and fed in as an alternative supply.
​Solar systems are made up of solar panels (modules), a mounting system and an inverter with computerized controller. Solar panels produce DC electricity from sunlight. Then the inverter converts the generated electricity into AC, so that it can be used in the household. The computerized controller manages the solar system and ensures optimal performance. If you want battery backup system or an off-the-grid solar system, a battery is required.

  • The benefits of Solar energy installation
  • Major savings you’ll make on energy bills
  • Generate your own clean and FREE energy
  • Non reliant on non-renewable fuels
  • Reduced CO2 emissions • Plan your future utility bills
  • Contribute to a healthier and cleaner environment for the next generation
  • Start saving now – the sooner you install a Solar energy system, the sooner you’ll gain the benefits
  • Achieve your company’s environmental goals
  • Makes a visible statement to your customers and competitors
  • Much lower servicing costs.

Installing Solar Panels & Solar System in Dubai
1. First you must make sure that your roof or where ever you’re going to be mounting your solar panels is strong enough for solar panel installation and to support the weight. There’s no point in installing solar panels on a roof that is going to cave in and ultimately cost you more money to repair.

2. Unless you’re using solar roof tiles, the next thing you must do in the process of solar panel installation is measure the dimensions of your roof and insure that your solar panels (the entire solar array) can fit in the available space. When installing solar panels, you may also want to consider using an area where there is considerable space for the addition of more panels in the future. For proper solar panel installation, ideally solar panels should go on a roof top that faces the direction that the sun comes up from. So if in your area the sun rises in the east, your panels should face east for maximum exposure. Just make sure the roof has no shade on it from other homes, buildings, trees, etc.

One important thing you must know about solar panel installation is that, having just one solar panel in the shade can stop your whole solar array from working. Also when you are installing solar panels, make sure that shade won’t come with the changing of the seasons or with the future development in your neighbourhood. Install solar panels no closer than 12″ from the edge of the roof and 16″ from the eaves.

3. Before you install solar panels, you must install brackets on sloped roofs or mount rails on flat roofs. Solar panel mounts can be bought in home improvement or solar stores. Stand offs for the brackets or rails must be secured to the home’s rafters or trusses, not just the sheathing. Solar installation brackets are used on roofs that are sloped, but the slope must be positioned in a way that gives the panel good direct exposure to the sun. A mount rail system is used in solar installation to allow you to position the panel in any angle you want. It is important that you keep all the solar panels at the exact same angle and height (even when the roof slope changes) to keep the voltage production the same. Make sure you use roof sealant where you drill the screws into the roof when attaching the brackets or mount rails – so no rain water can leak through the holes in your roof. Follow the instructions that come with the brackets or rail system you use to insure that your solar panel installation is done according to manufacturer’s recommendations.

4. Then attach your solar panels by hoisting them up to your roof, laying them out onto the brackets or mount rail system and fastening them onto the bracket or rail system. When installing solar panels make sure they don’t accidentally slide off of very sloped roofs before you get a chance to secure them.

5. When solar panel installation is complete and your panels are secure you must connect them together according to how you want them to produce power. Make sure all your wires are properly insulated and water proofed (wrapped with black electrical tape). To prevent shock always connect a ground wire from the mounting hardware to the earth when performing solar installation.

6. Once the panels have been connected and aligned in place, conduit must be run underneath the panels, to a junction box, down the side of the house and to the first photovoltaic component in your system – usually the DC disconnect (see solar system types for proper order of PV components).

For solar power installation you must use “wiring” consisting of three wires: negative, positive and ground wire. None of the wiring should be touching the actual roof. Installing conduit over all wires coming out of your panels is essential to protect them from exposure to rain, sunlight and the other elements.

7. Now set up all of your photovoltaic components according to manufactures instructions (but don’t connect them yet). Install your inverter and the other photovoltaic components in a garage or an outbuilding. Make sure that the area is dry, well ventilated and that the space is not subject to extreme hot or cold temperatures. This is especially important when it comes to your battery bank. In fact, if there’s going to be any cold whether at all, you should use a battery box around your entire battery bank to protect it form changing environments. A battery box is also necessary to protect children and pets from accidental electrical shock.

8. The next step in a typical PV installation would involve running the power from your inverter into your home’s AC breaker panel and other system components. To do this, first turn off the main breaker and de-energize all AC and DC sources of power.

Then connect your inverter to your AC breaker panel. Connect the PV wires to the DC disconnect switch and to the other photovoltaic system components up until the main DC disconnect. Then connect the main DC disconnect to the inverter.

After you do this, (and insure that your system is safe by getting a professional electrician to test and verify that everything is working properly), you can turn on your breakers and DC/AC disconnect switches and electricity will be distributed from the AC breaker panel to any electrical loads in your home.

When wiring through walls, use conduit to protect against shock and short circuits. For outdoor wiring, use PV conduit over the wires, with water proof fittings or use duct seal to keep water out.

Also anytime, you’re going to be sharing solar power with power from your electric company, it’s a good idea to install a second smaller panel box beside your main one for the solar feed, along with a convenient shut off switch to make cutting the power from the solar panel easy if necessary. A very common and usually required safety procedure in solar installation.

The breaker that is used for the solar feed must not exceed 20% of the AC breaker panel’s service size. So if your home’s electrical service is 100 amps, this limits your breaker size to 20 amps. If you install solar panels and a pv system that has more amps than that, you may need to increase your homes electrical service to a 200 amp or higher.

Obviously, this is just a general outline of the solar installation process. A Guide To Photovoltaic (PV) System Design and Solar Installation. It’s free and if you like reading, it covers everything.

Solar Installation Shortcuts

Here we list a few alternative ways you can save even more money (and work) by simply working around some of the more expensive and “legally complicated” aspects of solar energy installation.

Roof or Yard?
If solar panel installation is a little too labor intensive for you and you don’t want to go through all the trouble of mounting and installing solar panels on your roof, you can always place them in your backyard or on your balcony. This will require your panels to have some kind of a stand or adjustable support behind them.

However, different areas have different rules for this as well. Some areas require that any solar panels not mounted to the roof must be protected from the general public via the use of fencing or a pole mount 8 feet or higher. Do your homework and find out what’s required in your area before proceeding. You can learn more about pole mounting solar panels by clicking here to go to the Pole Mounted Solar Panels section of our website.